Last updated: —
Map controls ▾
Layers ▾
Infrastructure & boundaries
FinalProposedDeleted
Natural gasCrude oilPetroleum productsHGL
Infrastructure & boundaries: Colorado only, from federal sources (DoD, NRC, DOE, EIA, FAA, EPA, U.S. Census). Each loads the first time you switch it on.
✈️ Firefighting aircraft Opens ADS-B Exchange live map ↗
✈️ Aircraft tracking Opens ADS-B Exchange in a new tab. Aircraft may drop off in remote terrain or at low altitude, so an empty map doesn't always mean no air operations.
Toggle road closures to load current CDOT incidents.
Trails: Zoom in to load trails for your area. Always confirm access and seasonal closures with the managing agency before heading out.
Alerts ▾

Active wildfires

Loading…

Weather alerts

Loading…

Flood-stage gauges

Loading…
Sources: National Weather Service (api.weather.gov), National Interagency Fire Center (NIFC WFIGS), USGS Water Services. This is an informational aggregator, not an official emergency alert system — always follow guidance from local authorities.
Free · live · no login required

Live Colorado conditions
for every resident

Live wildfire, weather, flood, and road information for Colorado residents — no login required.

In a life-threatening emergency, call 911 first.
—Active wildfires in Colorado
—NWS weather alerts
—River gauges reporting
—Gauges above 8 ft

Counted live from the map's feeds when this page loads, and again every 10 minutes.

Not an official alert system — call 911 first No login required Sources: NWS · NIFC · USGS · CDOT · COTREX

What is Colorado Monitor?

Colorado Monitor gathers information from public sources including the National Weather Service, the National Interagency Fire Center, USGS, and Colorado state agencies onto one live map of Colorado — wildfires and their perimeters, weather alerts and radar, river gauges, road closures, and hiking and off-road trails — alongside evacuation-zone help, official phone numbers and ways to help your neighbors.

This is an informational aggregator, not an official emergency alert system. Data may be delayed, incomplete, or unavailable. Always follow the guidance of local authorities and official emergency channels.

Live right now

What is the map showing right now?

The same live lists as the map's Alerts panel.

Active wildfiresLive
Loading…
Weather alertsLive
Loading…
Flood-stage gaugesLive
Loading…
See them on the map
Map layers

What's on the map?

Every layer comes from a public source and can be switched on or off from the Layers list.

Active wildfires

Wildfire incidents from the National Interagency Fire Center (NIFC WFIGS). Zoomed out, each fire is a flame marker; zoom in and fires that have been mapped show their shaded perimeter with a label for name, acres and containment.

On by default · perimeters appear when you zoom in

NWS weather alerts

Every active National Weather Service alert for Colorado from api.weather.gov, drawn as purple areas. Tap an area for the alert's headline.

On by default

Live weather radar

NEXRAD base reflectivity from the Iowa Environmental Mesonet. When radar is on, the base map is softened so storm cells stand out.

Refreshes every 5 minutes

River & flood gauges

Live gauge heights from USGS Water Services. Gauges reading above 8 ft turn orange and are listed under Flood-stage gauges — a rough “worth watching” threshold, not an official flood stage.

On by default

Road closures

Current CDOT / COtrip incidents through Colorado Monitor's proxy: closures in bright red, crashes, maintenance and other road events. Closed stretches are traced along the real road; a dashed line means the exact path wasn't available.

Turn on in Layers

Hiking & off-road trails

Trails from the Colorado Trail Explorer (COTREX): hiking in teal, off-road / ATV in orange. Tap a trail to highlight all of it with length, elevation, surface, allowed uses and manager.

Zoom in to load trails for your area

Trailheads

Statewide trailhead points from COTREX. Always confirm access and seasonal closures with the managing agency before heading out.

Turn on in Layers

Contour topo style

Switch the base map from Esri World Topographic to OpenTopoMap's contour-line style.

Turn on in Layers

Firefighting aircraft

Opens the ADS-B Exchange live map in a new tab. Aircraft may drop off in remote terrain or at low altitude, so an empty map doesn't always mean no air operations.

Link in Layers

Military bases

Department of Defense installations in Colorado from the DoD MIRTA dataset, published by the Bureau of Transportation Statistics. Shaded boundaries; tap one for its name, branch and status.

Turn on in Layers

Nuclear sites

A short list of Colorado nuclear-related sites taken only from official U.S. NRC and U.S. DOE pages: the USGS research reactor, uranium mills under decommissioning, and DOE legacy sites such as former Rocky Flats. Each popup links to its official page.

Turn on in Layers

Oil & gas pipelines

Major interstate and intrastate pipelines from the U.S. Energy Information Administration, via U.S. DOT and DOE: natural gas in pink, crude oil in charcoal, petroleum products in indigo and HGL dashed. Tap a line for its operator and type.

Turn on in Layers

Airports

Open Colorado airports from the FAA, via BTS. Larger icons mark commercial-service airports such as DEN, COS and GJT. Tap one for its FAA code and public or private use.

Turn on in Layers

Counties

All 64 county outlines from U.S. Census TIGERweb. County names appear once you zoom in.

Turn on in Layers

Congressional districts

Colorado's eight districts for the 119th Congress from U.S. Census TIGERweb, outlined and labelled CO-1 to CO-8. Boundaries only.

Turn on in Layers

EPA Superfund sites

Colorado sites on the EPA's National Priorities List. Zoomed out, each site is a diamond marker coloured by status (final, proposed, or deleted after cleanup); zoom in to see the site's shaded boundary. Each popup links to the site's EPA profile page.

Turn on in Layers · boundaries appear when you zoom in
Getting started

What happens when you open the map?

No login, no setup. This is what you'll see.

1

Read the notice

Each visit starts with a short notice: this is an informational aggregator, not an official emergency alert system. In a life-threatening emergency, call 911.

2

The map is already loading

Active wildfires, NWS weather alerts and river gauges are switched on. Data refreshes every 10 minutes, and “Refresh now” fetches it immediately; the bar shows when it last updated.

3

Open Layers to add more

Turn on live radar, road closures, hiking and off-road trails, trailheads or the contour topo style. The aircraft link opens ADS-B Exchange in a new tab.

4

Zoom in for detail

Mapped fires switch from a flame marker to their shaded perimeter with name, acres and containment. Trails load once you zoom to a regional view. Tap anything for details.

5

Check the Alerts lists

The Alerts group lists every active wildfire, every Colorado weather alert and any gauge reading above 8 ft. On a phone, the controls slide up from the bottom of the map.

Questions

Common questions about Colorado Monitor

Straight answers about the map, the data and staying safe.

Is Colorado Monitor free?
Yes. Every page and every map layer is free to use, with no login required and nothing to sign up for.
Is this an official emergency alert system?
No. Colorado Monitor is an informational aggregator, not an official emergency alert system. Data may be delayed, incomplete, or unavailable. Always follow the guidance of local authorities and official emergency channels. In a life-threatening emergency, call 911.
Where does the data come from?
From public sources: the National Weather Service (api.weather.gov), the National Interagency Fire Center (NIFC WFIGS), USGS Water Services, CDOT / COtrip road incidents, the Colorado Trail Explorer (COTREX) and the Iowa Environmental Mesonet radar. The Sources page lists each one and what the map uses it for.
How often does the map update?
Fires, weather alerts, river gauges and road closures refresh every 10 minutes, and radar every 5 minutes. Press “Refresh now” above the map to update right away; the bar shows the time of the last update.
Why can't I see a fire's perimeter?
Not every fire has one — only fires large or mapped enough to be surveyed. Zoom in: mapped fires switch from a flame marker to their shaded perimeter. Fires without a perimeter stay as a flame marker with their name and acres.
Why don't any trails show up?
Trails load for the area you're looking at once you zoom in to a regional or mountain-range view. Turn on Hiking trails or Off-road / ATV trails in Layers, then zoom in.
What do the river gauge colours mean?
Blue gauges are reporting normally. Orange gauges read above 8 ft and are listed under Flood-stage gauges — a rough “worth watching” threshold, not an official flood stage. Check the National Weather Service for flood warnings.
How do I find my evacuation zone?
Use Genasys Protect (formerly Zonehaven) to look up your address. There's no single statewide evacuation zone system, so if your address doesn't show a zone, check your county's emergency management page. The Evacuation Zones page explains the status levels.
How do I get emergency alerts on my phone?
Colorado's emergency alerts are issued by your county or city, not statewide. DHSEM's directory at dhsem.colorado.gov/emergencyalert links to every county's alert sign-up — see Official Resources.
How can I help during a disaster?
Register with an established organization first and give cash rather than goods when possible. The Get Involved page lists vetted relief and conservation groups, and 2-1-1 can connect you with current opportunities.

Know before you go — and before you need to leave.

Open the live map for current fires, weather alerts, river gauges and road closures, then look up your evacuation zone and sign up for your county's alerts.

In a life-threatening emergency, call 911.